COEF srl. Via Albinatico, 80-82 51019 Ponte Buggianese (PT) ITALY www.coef.it / www.coef.net Realized by PC CAD & VIDEO MP250 Zoom info@coef.
COEF srl. Via Albinatico, 80-82 Ponte Buggianese 51019 ( Pistoia ) ITALY tel. (+39) 0572-636536 r.a. Fax (+39) 0572 - 636535 http://www.coef.it - http://www.coef.net e-mail: info@coef.it Tutti i diritti di riproduzione, diffusione del presente manuale sono riservati a COEF srl. Le descrizioni ed illustrazioni fornite nella presente pubblicazione non sono impegnative. COEF srl. si riserva il diritto di apportare in qualsiasi momento tutte le modifiche che riterrà opportune.
INDEX 1.0 HOW TO USE THE MANUAL ......................................................................................................... 1.1 TECHNICAL NOTES ................................................................................................................ pag. 4 pag. 4 2.0 INSTALLATION .............................................................................................................................. pag. 5 2.1 Lamp mounting and re-lamping ....................................
1.0 HOW TO USE THE MANUAL This manual has been organized in order support the user, the installer or the maintenance operator of the described unit with those necessary informations for a correct use of the installation and working procedures of the same unit. The various procedures will be just signalled by indicators (when necessary) evidencing the operation dangers and the necessity of technical support. Please find here below a list of symbols and relative meaning.
2.0 INSTALLATION The constructor is not to be considered responsible in the case of: • • • • • • • • improper use of the unit or use by not trained staff use in contrast with the directions on work safety wrong installation defective power supply serious lacks in the necessary maintenance unauthorized modifications and interventions use of spare parts that are not original or not specific for the unit total or partial inobservance of instructions • Unusual events 2.
2.3 PROJECTOR INSTALLATION To fix the MP250 Zoom is necessary, when the installation has to be on a raised-from-the ground support, to block the fixing bracket of the unit by means of a screw provided with nut and locknut measuring not less than M10X50, to insert in the central pre-arranged hole on the fixing bracket.
3.0 POWER SUPPLY CONNECTIONS Supply the projector by connecting it as indicated in picture Power supply: 100/120/200/230 V~ 50-60 Hz. Voltage and frequency as indicated on the rear of the projector. Power absorbed: see table pag. 4 3.1 DMX 512 CONNECTIONS Connect the projector to the control unit by means of a RG58 or RG59 coaxial cable supplied with 3 Pin XRL Cannon plugs and connectors. Respect, according to the indications on the panel, the input and the output of the DMX 512 signal. http://www.
4.0 SPECIAL FUNCTIONS AND PROJECTOR ASSIGNMENT On the front panel of MP250 Zoom you'll find a section for the additional functions and for setting the projector. Following the picture, you can see all the offered possibilities in detail. All operations are to be carried out with the E, F, G, H buttons, respectively indicated as MENU, ENTER, DOWN and UP. The display D will inform you about the selected functions. The 3 A, B, and C leds will allow you to know: A = reception of the DMX line. B = lamp ON.
4.
5.0 8 CHANNELS CH 1 2 MODE1 CHANNELS AND DIGITAL VALUES 9 CHANNELS SHUTTER / STROBE / DIMMER 0-5 SHUTTER closed 6-100 DIMMER Adjustment 101-110 DIMMER 0 > 100% Automatic 6 sec. 111-120 DIMMER 100% > 0 Automatic 6 sec.
8 CHANNELS CH 3 GOBOS 0 - 10 11 - 20 21 - 30 31 - 40 41 - 50 51 - 60 61 - 70 71 - 80 81 - 90 91 - 100 101 - 110 111 - 120 121 - 130 131 - 140 141 - 150 151 - 160 161 - 170 171 - 180 181 - 193 194 - 205 206 - 230 231 - 255 Neutral GOBO 1 chann.4 GOBO 2 chann.4 GOBO 3 chann.4 GOBO 4 chann.4 Reduction GOBO 5 chann.4 GOBO 6 chann.4 GOBO 7 chann.4 GOBO 8 chann.4 GOBO 1 chann.4 GOBO 2 chann.4 GOBO 3 chann.4 GOBO 4 chann.4 GOBO 5 chann.4 GOBO 6 chann.4 GOBO 7 chann.4 GOBO 8 chann.
6.0 FOCUS ADJUSTMENT 7.0 ZOOM ADJUSTMENT 12° 21° The width of the light beam of the MP250 Zoom is adjustable between 12° and 21° by means of the knob located on the front part of the projector and indicated with the writing ZOOM. Position your projector and adjust this knob in order to obtain the desired beam width. Do not force your adjustment beyond the upper and lower limits of the available stroke. 8.
9.0 ORDINARY MAINTENANCE The ordinary maintenance is fundamental for the perfect efficiency of MP250 Zoom, in order to prevent any functional defect as a reduced light beam or irregularities in the movement of the projector or of other rotating parts. The parts which need more maintenance are shown in the figures. In order to free them from dust or grease, clean them with a soft cloth and normal products for windows cleaning. 9.
9.2 ELECTRONIC MAINTENANCE This section is dedicated in detail to the electronic connections between the card and the mechanical components, assembled in the projector. These informations will be absolutely necessary when the mechanical unit has to be removed from the projector for maintenance and/or repair. The connections are made using handy connectors and are detailed where you can find indications about the connection between a specific connector and a specific component of the mechanical unit.
10.0 TROUBLESHOOTING PROBLEM The projector doesn’t switch on CAUSE ACTION - The power supply is not present Check if the luminous indicator is lighted or not. - The lamp is not working Replace the lamp. The projector switches on but - Wrong DMX configuration doesn’t answer to commands Make sure that the projector is correctly configurated. - Defective cables Replace or repair the DMX cable. - Defective control unit Chek the control unit by means of other working projectors.
11.0 CONFORMITY DECLARATION Declaration of CE Conformity We, Manufacturer/Importer COEF srl.
12.0 ELECTRIC DIAGRAM http://www.coef.net - info@coef.it Pag.
13.0 Pag. 18 DIMENSIONS Http://www.coef.it - info@coef.
14.0 PART ASSEMBLY http://www.coef.net - info@coef.it Pag.
Pag. 20 Http://www.coef.it - info@coef.
