Table of Contents Introduction A1 How Your Cobra Power Inverter Works ® 1 Rechargeable Appliances 2 Quick Checkout 3 Operation 4 Controls and Indicators 5 Operating Limits 5 Input Voltage/Automatic Shutdown 6 Troubleshooting Guide 7 Maintenance and Service 8 Power Consumption 9 Specifications 10 Limited 1-Year Warranty CPI190_MANL_vC1.
1 RECHARGEABLE APPLIANCES CAUTION Certain rechargers for small nickel cadmium batteries can be damaged if connected to the unit. Two types of equipment are particularly prone to this problem: 1. Small battery operated appliances that can be plugged directly into an AC receptacle for recharging, including flashlights, razors, and night lights. 2.
2 QUICK CHECKOUT Quick Checkout (continued) To connect your inverter to the power source: 1. If the power source is a DC power supply, switch it off. 2. Insert the cigarette lighter plug into your vehicle’s cigarette lighter. OPERATION Testing The inverter will come on automatically. It should supply power to the load. If the inverter does not appear to work properly, refer to the Troubleshooting Guide on page 7. 5V/2.
OPERATING LIMITS INPUT VOLTAGE/AUTO SHUTDOWN CONTROLS & INDICATORS Powering Up Power/Fault Indicator Power Output To apply power to the CPI190, simply plug in to 12 Volt DC source (cigarette lighter). The “fault” indicator of your CPI190 will light whenever the unit detects excessively high or low input voltage, or begins to overheat. AC Output: Your CPI190 will deliver 130 watts continuously. (NOTE: the wattage rating applies to resistive loads.) USB Output: 5 Volt continuous output.
6 MAINTENANCE & SERVICE TROUBLESHOOTING GUIDE Problem/ Symptom Possible Causes Solution Low output voltage Overload Reduce the load. No output voltage Low input voltage Recharge battery. Maintaining Your Inverter Your CPI190 requires very little maintenance to keep it operating properly. The exterior of the unit should be cleaned periodically with a damp cloth to prevent accumulation of dust and dirt. Keep vents and fans free from dust or debris.
7 POWER CONSUMPTION MAINTENANCE & SERVICE Service (continued) If you suspect that your unit requires service, please call 773-889-3087 BEFORE shipping it to Cobra®. This will ensure that you receive service as quickly as possible. If you are asked to send your unit to the Cobra® factory, please follow these steps: 1. Send the complete unit. 2. For warranty repair, enclose some form of proof-of purchase, such as a photocopy or carbon copy of a sales receipt.
9 SPECIFICATIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 12. 13. 14. 15. 16. Specifications Continuous output power 130w Surge rating (0.1second) 260w Peak efficiency (12V—1/2 load) 85% Efficiency (full load, 12V) >78% No load current draw < 0.45 A (12.6 VDC) Output waveform (resistive load) Modified sine wave Output frequency 60Hz ± 2Hz Output voltage 115V +/- 10% USB output 5V/2.4A Input voltage 10.4 - 14.4 VDC Shutdown voltage (without load) 10.0V ±0.
130 Watt POWER INVERTER MODEL CPI190 Congratulations Thank you for purchasing the CPI190 Power Inverter from Cobra®. When used properly, your unit will give you many years of reliable service. The operating features include: • USB 5V/2.4A Output • AC receptacle • Low battery shutdown • Automatic thermal protection/shutdown Cigarette Lighter Plug 5V/2.
INTRODUCTION The Cobra® line of quality products includes: CB Radios microTALK® 2-Way Radios Radar/Laser Detectors Mobile GPS Navigation Systems HighGear® Accessories CobraMarine® VHF Radios Power Inverters Accessories For more information about our products, or to order online please visit our website: For Best Results Your CPI190 must be used properly in order to provide the best possible results. Please read all instructions carefully before using the unit.
