wassailing Lopsidedness s IS LIMITED LIFETIME WARRANTY Compass Manufacturing International warrants to the original consumer purchaser that the faucet be free from defects In material and workmanship for 2s long as the original consumer purchaser owns the home in which the faucet was first installed. In the event that Doreen faucets are used n a Commercial Application, this warranty s lifted for overload of 5 years, unless otherwise specifically stated In the catalog and/or price book.
Helpful Tools Tools: Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing.
1. Shut off water supply and drain lines. Clean sink surface thoroughly. Make sure mounting area is clean and dry. 2. Position the faucet, deck plate {ยง and putty plate @0 on counter top as shown.
A Faucet tailpiece B .faucet tailpiece C Faucet tailpiece : Connect to water supply lines with either: 0.D. Copper tubing (ball nose risers with the coupling nuts or; (B) 3/8" Copper tubing (no ball) with supplied tube head interior connector or; (C) IPS faucet connectors ) Warning: The supply valves and supply lines are not included. Important: Remove the aerator and let both hot and cold water run for one minute to clear any line trash. This will help clean /1 A any debris that might clog the system.