SDS

ManualsBrandsClipStone ManualsBuilding materials10" x 12" Walnut Manufactured Stone Light Box

Material Safety Data Sheet

Original 06/23/08 Revision 05/02/09

Product Name: ClipStone Manufactured Stone Veneer

Environmental Materials LLC dba Environmental StoneWorks

6300 East Stapleton Drive South

Denver, CO 80216

Emergency and Technical Information: 303-309-3040 8am – 5pm MST

SECTION 1 COMPANY AND PRODUCT INFORMATION

Ingredient CAS # Concentration (approximate)

Portland Cement (Respirable Quartz) 65997-15-1 25-35% by weight

Lightweight Aggregate (Crystalline Silica) 14808-60-7 50-60% by weight

Iron Oxide Pigments 1309-37-1 0-5% by weight

Chemical Admixtures proprietary 0-5% by weight

SECTION 2 COMPOSITION / INFORMATION ON INGREDIENTS

Emergency Overview: Manufactured stone veneer varies in size, shape, color and texture.

Negative health effects are not expected to occur during the

use of this product; however, inhalation of dusts, during dry

cutting, sawing, grinding, sanding, breaking, or drilling, may cause

respiratory irritation.

Potential Health Effects:

Eye Contact: Irritation of the eyes may occur, due to the generation of dust

from dry cutting, sawing, grinding, sanding, breaking, or drilling

this product. Irritation include redness, tearing, and blurred vision.

    Provideimmediaterstaid(Section4)andifnecessary,seek

medical attention.

Ingestion: This product should not be eaten. If ingested accidentally, this

product may pose a choking hazard.

Inhalation: This products contain crystalline silica. Dust is generated when

dry cutting, sawing, grinding, sanding, breaking, or drilling this

product. Prolonged exposure to crystalline silica can aggravate

other lung conditions and cause silicosis, a disabling and

potentially fatal lung disease. Exposure to this dust may cause

irritation to the moist mucous membranes of the nose, throat

and upper respiratory system. It may also leave unpleasant

deposits in the nose.

Skin Contact: Dust is generated when dry cutting, sawing, grinding, sanding,

breaking, or drilling this product. This dust may cause irritation.

SECTION 3 HAZARD IDENTIFICATION

Summary of content (5 pages)

PAGE 1
Material Safety Data Sheet Original 06/23/08 Revision 05/02/09 SECTION 1 COMPANY AND PRODUCT INFORMATION Product Name: ClipStone Manufactured Stone Veneer Environmental Materials LLC dba Environmental StoneWorks 6300 East Stapleton Drive South Denver, CO 80216 Emergency and Technical Information: 303-309-3040 8am – 5pm MST SECTION 2 COMPOSITION / INFORMATION ON INGREDIENTS Ingredient CAS # Portland Cement (Respirable Quartz) 65997-15-1 Lightweight Aggregate (Crystalline Silica) 14808-60-7 Iron Ox
PAGE 2
SECTION 3 HAZARD IDENTIFICATION (CON’D) Medical Conditions Aggravated by Exposure: Pre-existing upper respiratory and lung disease or unusual sensitivity to dust. Carcinogenic potential: Manufactured stone veneer is not listed as a carcinogen by NTP, OSHA or IARC. It may however, contain trace amounts of substances listed as carcinogens by these organizations.
PAGE 3
SECTION 7 HANDLING AND STORAGE There are no special handling or storage procedures for this product; however, it is best to avoid the generation of dusts. SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION Although cured concrete products pose little if any exposure risk as packaged/delivered, the generation of dusts during modification requires that individuals follow all applicable exposure limits and use required PPE to prevent the possibility of harmful exposure.
PAGE 4
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES Appearance: Cured lightweight concrete product of various dimensions, textures and colors.
PAGE 5
SECTION 12 ECOLOGICAL INFORMATION No information available for this product. SECTION 13 DISPOSAL Residual and/or excess material scrap from this product does not meet any of the characteristics of hazardous waste, nor are they listed as hazardous waste.