Operation Manual

PRIORITY CONTENT
While with DVD Audio disk, the user may define if the priority is to play the Audio content or the Video.The following
options are available:
PICTURE CD VIEW
There are two options are available in Picture CD View.
Original = Used to switch the picture size to the current display resolution directly.
Fit to screen = Like letter box.Take the minimum value of horizontally fit scale ratio and
vertically fit scale ratio.
AUDIO SETTINGS
1. Using the LEFT/RIGHT direction buttons, move to the Audio button and press OK.The player's Audio settings will
appear:
2. Press the LEFT/RIGHT direction buttons to select the Audio button.
3. Press OK to display the player's Audio settings.
4. Press UP/DOWN direction buttons to select the setting to change.
5. Press OK to display a list of the option.
6. Press UP/DOWN direction buttons again to move among the displayed options.
7. Press OK again to choose the option and change the setting.The following subsections explain the available options
for each of the player's Audio settings.
DIGITAL OUTPUT SETTING
(*This option is not available for MCD 773)
Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports to work in harmony with the
audio equipment (e.g. receiver, speakers) connected to the player.The following options are available:
- PCM = A S/PDIF output is connected to a receiver that accepts PCM S/PDIF.
- Bitstream = A S/PDIF output is connected to a receiver that accepts CDTS/ACS/ MP3/WMA/MPEG/PCM
S/PDIF(factory defance)
- Off = Digital audio output is disabled.
DYNAMIC RANGE CONTROL SETTING
Selecting the DRC setting allows the user to enable/disable the DRC.The following options are available:
- On = DRC is On.
- Off = DRC is Off (Factory default)
RATING SETTINGS CHANGE
1. Using the LEFT/RIGHT direction buttons, move to the Rating button and press OK; the player's Rating settings
will appear:
*
31
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 31