Installation Guide

Classic Home
House Parts, Inc., P a g e 1 | 2
Installation For 2” and 2 ¼” Wood Pole and Drapery Bracket #9323 Pair
House Parts urges you to engage a professional installer.
Start at the Window where the Treatment will be Installed
Brackets should be installed into window frame or studs.
Only light weight fabric drapes should be hung on installations into Drywall using the mollie/anchors
which are included.
Common installations for window treatments are:
1) To make windows appear larger and allow more light into the room, mount
the pole at the top edge of the trim and allow the rod width to extend beyond the actual
width of the window by 3” to 10”.
2) Above the window on the wall
3) On the window frame
4) Inside the window frame
Drapery finials will add approximately 6 inches to the width of the overall installation.
Measuring for the Height of Your Draperies
To determine the vertical height for mounting the brackets, you need to decide if the bottom of the
draperies should fall at the window sill, below the sill, fall to the floor or puddle on the floor.
The top of the draperies should be approximately 4” above the glass so the back of the pleats will not
be visible from outside the window.