FAQ

Frequently Asked Questions

How do I read batch codes?

Year Day Month

Example: 200310

(October 3, 2020)

What’s the products shelf life?

-2 to 3 years

-Stored in cool area

-Keep out of the heat

How do I apply?

-Please refer to our YouTube videos. We have step-by-step tutorials

-Technical Data Sheets (TDS) on our website have instructions as well

Should I brush, roll on, or spray?

-Personal preference

-Each application gives a different finish

-Always do a test area first

What kind of brush/ roller/ sprayer do I use?

Brush:

-We do not recommend using a brush

Roller:

-3/8-inch nap roller

-Make sure to de-lint it first with tape, so fuzzies do not get on the surface

Sprayer:

-Handheld Hudson sprayer, backpack sprayer, airless sprayer, pump sprayer.

-Anything with a CONE tip. NO FAN TIPS- they leave streak marks

After I clean, how long do I wait until I can start staining?

-We recommend cleaning the day before, that way you can come in the next day and see

any spots you missed.

-Stain & Seal next day

How many coats do I apply?

*Cleaners *Stains *Sealers

-We always recommend 2 coats

-You can do 3 for a heavier color

-You can do 1 for a lighter color

-It is personal preference

PAGE 1
Frequently Asked Questions How do I read batch codes? Year Day Month Example: 200310 (October 3, 2020) What’s the products shelf life? -2 to 3 years -Stored in cool area -Keep out of the heat How do I apply? -Please refer to our YouTube videos.
PAGE 2
How long do I wait in between coats? 30 mins or so. It depends on the temperature. -As long as the surface is dry, you can apply the next coat. After staining, when can I seal? -Approximately 1 hour after staining. -As long as the stain is dry, you can apply sealer Does each gallon’s coverage include 2 coats or 1? -Each gallon’s coverage includes 2 coats Can I use the densifier/ penetrating sealer over a stain? -No. Penetrating sealers cannot go over stains.
PAGE 3
I have 5-year-old concrete that's never been stained, I don't need to clean with the Organic Concrete Cleaner, right? -No. All concrete surfaces should be cleaned before staining + sealing. -It Doesn't matter if it's never been stained, there can still be calcium or efflorescence sitting deep inside that needs to be cleaned out, or it will come up later Does the product come ready, or do I have to mix with water? All products come ready to go.