Owner's Manual

36
Using the SSP-300
Your SSP-300 includes a versatile touchscreen LCD display which supports most of your
day-to-day operations (as well as a flexible menu system for functions you use less often).
While the use of this touchscreen is quite intuitive, it is also quite extensive. This section
of the owner’s manual outlines the use of this touchscreen in day-to-day operation of the
system.
The main, home menu provides easy access to the most basic functions of the surround
processor: source selection and mode selection. It also gives you the ability to “preview”
a source prior to actually sending it to the main display of your home theater, and quick
access to some controls you may use regularly. Finally, it provides both a numeric and a
graphic depiction of the current volume setting.
source selection Pressing any of the source buttons on the touchscreen will activate the corresponding
input. Note that the more
button in the top right corner brings up a second page of
sources, for a total of twelve.
If you do not have this many sources in your system, you can elect to deactivate any
unused inputs. Doing so removes their associated buttons from the touchscreen,
reducing confusion for occasional users of the system. If you have six or fewer sources,
the second page (accessed by the more button mentioned above) will not appear. See
The Menu System for details on deactivating unused inputs.