User's Manual

366
AXLES
SUSPENSION
STEERING
C3 AXLE GEOMETRY
B3CP07SD
Measuring front height Measuring rear height
[1] Gauge for measuring the wheel radius, 4 bolts, tool 4003-T or 8006-T (according to version).
Z1 = Measuring zone underneath the front subframe. Z2 = Measuring zone underneath the rear sill.
Measure the r
adius of the front wheel R1 - Calculate dimension H1 = R1 – L1 Measure the radius of the rear wheel R2 - Calculate dimension H2 = R2 + L2
Value at reference All types Except CRD (*) Vehicle CRD (*) Value at reference All types Except CRD (*) Vehicle CRD (*)
height Raised suspension Raised suspension height Raised suspension Raised suspension
(+ 6 - 8 mm)
Spor
ts Sports
(+ 10 - 6 mm)
Sports Sports
L1 = 142,5 mm L1 = 132,5 mm L2 = 52 mm L2 = 62 mm
(*) = CRD : Difficult road conditions.
Definition for a type of vehicle whose axles and suspensions are adapted for driving on rough roads.
Compress the suspension to obtain the calculated values. The height difference between the two axle dimensions should be less than 10 mm.
Checks at reference height