User's Manual

340
CLUTCH
GEARBOX
TRANSMISSION
AL4 AUTOMATIC GEARBOX
In passenger compartment.
The gear selector is guided by the shape of the stepped gate and by a retaining spring which
pulls it to the left hand side.
The gear selector control has 5 positions:
- P
osition «P»: Park (locking and immobilisation of the vehicle).
- Position «R»: Reverse gear.
- Position «N»: Neutral.
- P
osition «D»: Drive (use of the 4 gears in their autoadaptive automatic function).
- Position «M»: Manual (this position lets the driver select his own gears in sequential mode
by pulling the gear selector to «M-» or pushing it to «M+»).
NOTE: Only the positions «P» or «N» authorise the starting of the engine.
In position «M», selection is by an electronic sensor located close to the gear lever.
The v
ariation of flux necessary to the movement of the sensor cells is obtained by a magnet
located on the lever itself. This enables the change of status.
Engines: KFV - RFN
C3 - XSARA PICASSO
B2CP3H7D
B2CP3MUD
XSARA PICASSO
C3