User's Manual

276
INJECTION
SPECIAL FEATURES: PARTICLE FILTER / FILLING OF THE ADDITIVE RESERVOIR
Imperative: Respect the safety and cleanliness requirements.
Tools.
Filling kit comprising the following items:
1 Container of Eolys 2 Filters 2 Tubes
1 Empty container 2 Hooks 1 Adaptor
Filling.
IMPERATIVE: Respect the safety and cleanliness requirements specific to HDi engines.
IMPERATIVE: For all operations on the additive circuit, wear protective goggles and gloves
that are resistant to hydrocarbons.
Place the vehicle on a lift.
Disconnect the battery negative terminal.
Unclip the the factory filler connector (1).
Couple the container of additive to the tube (2) using the adaptor and the tube (with tap) from the
filling kit.
Screw the filler connector on the additive container (3) at «b».
Place the additive container (3) on the component lift.
Open the tap located on the filler connector at «a».
Tilt the additive container (3) (to facilitate the end of filling).
Close the tap at «a».
Remove the filler connector and the tube (4).
Couple the tube (2).
Reconnect the battery negative terminal.
IMPERATIVE: The filling kit should be recycled after this operation. Any «Eolys» additive
containers that ha
ve been opened should not be kept.
XSARA PICASSO
B1HP1UVC
C4BP1EGC