User's Manual

254
INJECTION
CHECKING AND SETTING THE DELPHI MECHANICAL INJECTION PUMP
Engine: WJY (continued)
Peg:
- The camshaft hub, using tool [2].
- The injection pump hub, using tool [3].
Impossible to peg the camshaft.
Reset the valve timing (See page 245).
Possible to peg the camshaft, but not the injection pump.
Carry out the following operations:
- Loosen the screws of the injection pump hub.
-
Turn the injection pump hub.
- Insert the peg [3] into the setting hole.
- Tighten the screws of the injection pump hub. Tighten to 2,3 ± 0,2 m.daN.
ESSENTIAL: If setting the diesel injection pump proves impossible,
reset the valve
timing. (See page 251)
Remove:
-
The tools [1], [2] and [3].
- The screw (6) and the washer.
Reassemble the components.
B1EP12WD B1BP1S9C
XSARA