Network Card User Manual
12
Catalyst 6500 Series DFC3A, DFC3B, and DFC3BXL Installation Note
78-15893-06
Removing the DFC3 Daughter Card
Figure 2 Unseating the CFC Daughter Card Connectors
Step 6
Gently lift the CFC daughter card with both hands and remove the CFC daughter card from the module.
Step 7 Place the CFC daughter card on an antistatic mat, antistatic foam pad, or in an antistatic bag.
Step 8 Proceed to the “Installing the DFC3 Daughter Card” section on page 23.
Removing the DFC3 Daughter Card
This section contains two DFC3 daughter card removal procedures. One procedure covers how to remove
the DFC3 daughter card from modules that are not equipped with a stiffener bracket. A second procedure
is included that covers how to remove the DFC daughter card from early versions of the
WS-X6748-GE-TX Ethernet module that are equipped with a stiffener bracket.
Note Only the WS-X6748-GE-TX Ethernet module might be equipped with a stiffener bracket.
WS-X5530
120046
S
TA
T
U
S
W
S
-X
672
4-S
F
P
24P
O
R
T
G
IG
A
B
IT
E
TH
E
R
N
E
T
- S
FP
1
2
3
4
5
6
7
8
9
1
0
1
1
12
13
1
4
15
1
6
71
1
8
19
20
2
1
22
2
3
24
Heat sinks