User's Manual
DescriptionName
Controls the DIMM power savings mode policy. This can be
one of the following:
• Disabled—DIMMs do not enter power saving mode.
• Slow—DIMMs can enter power saving mode, but the
requirements are higher. Therefore, DIMMs enter power
saving mode less frequently.
• Fast—DIMMs enter power saving mode as often as
possible.
• Auto—The BIOS controls when a DIMM enters power
saving mode based on the DIMM configuration.
CKE Low Policy
Serial Port Configuration Parameters
DescriptionName
Whether serial port A is enabled or disabled. This can be one of the
following:
• Disabled—The serial port is disabled.
• Enabled—The serial port is enabled.
Serial A Enable
USB Configuration Parameters
DescriptionName
Whether the server can boot from a USB device. This can be one of the
following:
• Disabled—The server can boot from a USB device.
• Enabled—The server cannot boot from a USB device.
Make Device Non-Bootable
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
260 OL-28893-01
BIOS Parameters by Server Model
Advanced BIOS Parameters for C460 Servers