User's Manual

CHAPTER 15
Server Utilities
This chapter includes the following sections:
•
Exporting Technical Support Data, page 173
•
Rebooting the CIMC, page 175
•
Clearing the BIOS CMOS, page 175
•
Recovering from a Corrupted BIOS, page 176
•
Resetting the CIMC to Factory Defaults, page 177
•
Exporting and Importing the CIMC Configuration, page 178
•
Generating Non maskable Interrupts to the Host, page 180
Exporting Technical Support Data
Perform this task when requested by the Cisco Technical Assistance Center (TAC). This utility creates a
summary report containing configuration information, logs and diagnostic data that will help TAC in
troubleshooting and resolving a technical issue.
If any firmware or BIOS updates are in progress, do not export the technical support data until those tasks
are complete.
Important
Procedure
PurposeCommand or Action
Enters the CIMC command mode.Server# scope cimc
Step 1
Enters the tech-support command mode.Server /cimc # scope tech-support
Step 2
Specifies the IP address of the remote server on which
the technical support data file should be stored.
Server /cimc/tech-support # set
remote-ip ip-address
Step 3
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 173