User's Manual

PurposeCommand or Action
Enters the Fibre Channel port login command mode.Server /chassis/adapter/host-fc-if # scope
port-p-logi
Step 34
Specifies the port login (PLOGI) retries value, the
number of times that the system tries to log in to the
Server
/chassis/adapter/host-fc-if/port-p-logi #
set plogi-retries count
Step 35
fabric after the first failure. The range is 0 and 255;
the default is 8 retries.
Specifies the port login (PLOGI) timeout value, the
number of milliseconds that the system waits before
Server
/chassis/adapter/host-fc-if/port-p-logi #
set plogi-timeout msec
Step 36
it tries to log in again. The range is 1 to 255000; the
default is 2000 milliseconds.
Exits to the host Fibre Channel interface command
mode.
Server
/chassis/adapter/host-fc-if/port-p-logi #
exit
Step 37
Enters the SCSI I/O command mode.Server /chassis/adapter/host-fc-if # scope
scsi-io
Step 38
The number of command descriptor block (CDB)
transmit queue resources to allocate. The range is 1
to 8; the default is 1.
Server /chassis/adapter/host-fc-if/scsi-io
# set cdb-wq-count count
Step 39
The number of descriptors in the command descriptor
block (CDB) transmit queue. The range is 64 to 512;
the default is 512.
Server /chassis/adapter/host-fc-if/scsi-io
# set cdb-wq-ring-size size
Step 40
Exits to the host Fibre Channel interface command
mode.
Server /chassis/adapter/host-fc-if/scsi-io
# exit
Step 41
Enters the Fibre Channel transmit queue command
mode.
Server /chassis/adapter/host-fc-if # scope
trans-queue
Step 42
The number of descriptors in the Fibre Channel
transmit queue. The range is 64 to 128; the default is
64.
Server
/chassis/adapter/host-fc-if/trans-queue #
set fc-wq-ring-size size
Step 43
Exits to the host Fibre Channel interface command
mode.
Server
/chassis/adapter/host-fc-if/trans-queue #
exit
Step 44
Enters the Fibre Channel receive queue command
mode.
Server /chassis/adapter/host-fc-if # scope
recv-queue
Step 45
The number of descriptors in the Fibre Channel
receive queue. The range is 64 to 128; the default is
64.
Server
/chassis/adapter/host-fc-if/recv-queue #
set fc-rq-ring-size size
Step 46
Exits to the host Fibre Channel interface command
mode.
Server
/chassis/adapter/host-fc-if/recv-queue #
exit
Step 47
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 91
Managing Network Adapters
Modifying vHBA Properties