User's Manual

AirLive WIAS-1200G
User’s Guide
151
3) Using DHCP: If you want to use DHCP, please
choose “Obtain an IP address automatically”
on the “IP Address” label and click OK. This is
also the default setting of Windows. Then, reboot
the PC to make sure an IP address is obtained
from AirLive WIAS-1200G.
4) Using Specific IP Address: If you want to use specific IP address, you have to ask the network
administrator for the information of AirLive WIAS-1200G: IP address, Subnet Mask, New gateway and
DNS server address.
Note:
If your PC has been set up completed, please inform the network administrator before proceeding to the following
steps.
y Please choose “Specify an IP address”
and enter the information given by the
network administrator in “IP Address” and
“Subnet Mask” on the “IP Address” label
and then click OK.