Specifications

Cinterion
®
TX62-W/TX82-W Hardware Interface Description
6.1 Revision History
164
t
TX62-W_TX62-W-x_TX82-W-x_HID_v01.200d 2022-09-08
Public / Preliminary
Page 159 of 170
Preceding document: "Cinterion
®
TXx2-W Hardware Interface Description" v00.200
New document: "Cinterion
®
TXx2-W Hardware Interface Description" v00.200a
Preceding document: "Cinterion
®
TXx2-W Hardware Interface Description" v00.038
New document: "Cinterion
®
TXx2-W Hardware Interface Description" v00.200
4.3.1.1 Changed Stencil thickness to 110µm and Stencil pattern in Figure 63
4.4.1.1 Revised Figure 66 and Figure 67
Chapter What is new
1.2 Removed extended voltage range and changed eUICC size MFF2 to MFF-XS
1.3 Revised Figure 1 regarding eUICC size
1.4 Removed in Figure 3 signal ADC2
2.1.2 Removed extended voltage range in Table 4
2.4 Removed in Figure 34 wrong PAD numbers
3.4.1 Removed extended voltage range in Table 23
4.2 Revised Figure 57
Chapter What is new
- New document layout
Throughout
document
Removed LTE Bd14.
Renamed LTE Bd4 (AWS --> AWS-1), LTE Bd66 (1700MHz --> AWS-3).
Added support for optional eUICC interface.
1.2 Added references from key feature list to appropriate document sections.
1.2 Added support for Cinterion
®
IoT Module services (MODS) as key feature.
2.1.1 Revised Note 2 of Table 3
2.1.2 Revised Table 4 related to power supply
2.1.2.1 Added absolute maximum ratings for digital lines in normal operation.
2.1.7 New section eUICC Interface.
2.1.11.2 Adapted power indication circuit shown in Figure 23.
2.1.11.3 Revised fast shutdown description.
2.3.1 Added note that concurrent GNSS and GSM/LTE operations are not supported.
2.3.2 Revised description for active GNSS antenna and Figure 33
2.3.3 Revised Table 14 listing GNSS antenna interface characteristics.
2.4 Revised Figure 34
3.2.3 Revised section Signal States after Startup including Table 14.
Chapter What is new