CINEPRO 4K6 4 SE GOLD HIGH RESOLUTION - EXTENDED DYNAMIC SIX CHANNEL THEATER AMPLIFIER OWNERS MANUAL DESIGNED FOR BOTH CONSUMER AND COMMERCIAL USE 4K6 MK-4 SE-Gold Copyright ©2003 Cinepro Inc.
CONGRATULATIONS! THE CINEPRO 4K6 MK-4 SE-GOLD IS A POWER AMPLIFIER THAT COMBINES INCREDIBLE POWER RESERVES WITH OUTSTANDING CLARITY AND FINESSE. IT IS HAND-BUILT BY SKILLED AMERICAN CRAFTSMEN. IT IS THE PINNACLE OF DESIGN, ENGINEERING AND CONSTRUCTION IN THE SERVICE OF CINEMA AND MUSIC. NEW FULLY BALANCED CIRCUITRY AND INSPIRED DESIGN AND LAYOUT TECHNOLOGIES NOW YIELD A DYNAMIC RANGE UNACHIEVED BY ANY OTHER AMPLIFIER CURRENTLY MANUFACTURED.
LOCATING YOUR AMPLIFIER Because of the extremely high-power capability of this amplifier, special consideration must be given to AC power and cooling airflow. Please read the following information carefully to ensure reliable, trouble-free operation of this instrument. Your Cinepro 4K6 MK-4 SE-Gold utilizes a combination of convection and forced-air cooling.
REAR PANEL CONNECTIONS - INPUT DUAL OR MONO Bridging switch (usually set to DUAL, unless mono operation is desired) FRONT INPUTS UNBALANCED RCA input jack CENTER/ SUR-EFX INPUTS BALANCED XLR input jack REAR INPUTS BAL / UN-BAL switch SET TO UN-BAL IF USING RCA INPUT JACKS. SET TO BAL IF USING XLR INPUT JACKS. (Note: each pair of inputs must be set separately.
SPEAKER OUTPUT FRONT CHANNEL GROUP HOOK THE APPROPRIATE SPEAKERS TO THE SPEAKER OUTPUT JACKS. IF DESIRED, ANY OF THE THREE DUAL CHANNEL GROUPS MAY BE USED IN STEREO, OR MONO. + MONO MODE – ONE THROUGH SIX CHANNEL OPERATION IS POSSIBLE. CENTER/ SUR-EFX CHANNEL GROUP REAR CHANNEL GROUP NEVER CONNECT ANY TWO SPEAKER OUTPUT JACKS TOGETHER! POWER INLET CONNECTOR ALWAYS USE GOOD QUALITY SPEAKER CABLES. OUTPUT - SPEAKER - MULTI-CHANNEL MODE Connect the speaker wires to the 5 way binding posts.
OPERATING NOTES OUTPUT POWER vs. SPEAKER SAFETY The Cinepro 4K6 MK-4 SE-Gold was designed to create peak sound pressure levels mimicking real life. This is important for the realistic reproduction of cinematic events. An on-screen gunshot or train wreck can create short-term power bursts of over 1000 watts! The Cinepro 4K6 MK-4 SE-Gold can faithfully reproduce these transients without strain.
BI- AND TRI-AMPLIFYING WITH THE 4K6 MK-4 SE-GOLD Most quality loudspeakers have two or more sets of input binding posts for connection to the amplifier. These separate the signals that are going to the woofer(s) from the signals going to the tweeter (and sometimes a third set of speaker wires isolates the signals going to the midrange). Normally, there are gold or tin plated metal shorting straps connecting the single speaker wire to both the low and high range drivers on each speaker.
SPECIFICATIONS AND FEATURES 4K6 MK-4 SE-GOLD OUTPUT POWER (ALL RATINGS 20-20KHZ @ < .10% DISTORTION, TYPICALLY .009%) Multi-channel Mode - per channel: 1200 WATTS-2 OHMS 800 WATTS-4 OHMS 650 WATTS-6 OHMS 475 WATTS-8 OHMS Mono Mode: 1400 WATTS-4 OHMS 1200 WATTS-8 OHMS DYNAMIC HEADROOM: 3.5dB (4 OR 8 OHMS) (OVER 1000 WATT PEAKS) SIGNAL/NOISE RATIO: (REF-RATED POWER)> -126dB UNWEIGHTED DAMPING FACTOR: > 1,100 @ 20HZ, 1000 @ 1KHZ POWER SUPPLY ENERGY RATING: >1300 JOULES INTERMODULATION DISTORTION: LESS THAN .
5 YEAR LIMITED WARRANTY - 4K6 MK-4 SE-GOLD CINEPRO warrants this amplifier to the original purchaser for a period of 5 years. Any failure due to parts or manufacturing defect will be repaired without charge during the warranty period. This warranty applies in all home and commercial applications. Warranty is void if unit is operated outdoors without adequate moisture protection. Misuse of the amplifier by improper wiring, improper line voltage, or physical abuse will not be covered.