Specification

IFM 05/14/18
®
INSTANT-FLOW MICRO - STANDARD FLOW
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
PRODUCT FEATURES
GUIDE SPECIFICATION
Member of
U.S.Green
Building Council
Water
Conserving
Product
M - ______ / _______
AMPS VOLTS
For the model being selected, please place the
corresponding amps and volts values
in the Guide Specifications to the right.
APPLICATION: commercial, industrial,
residential, kitchen/bar sink, service sink,
scrub sink, shower
to heat to a preset temperature of:
104°F (40°C) 110°F (43°C) Other temperaturem m m
settings available upon
request (specify below)
120 °F (49°C)m
Unit shall be provided with Celcon waterways, and Nichrome
heating coils.
Temperature controlled by microprocessor.
Tankless Water Heater shall be a Chronomite Laboratories
Model
with Amps and Volts
OPTIONS
PA 765 ABS Housing (P)m
Satin Finish Stainless Steel Housing (SS)m
High Polish Finish Stainless Steel (SSP)m
Pressure & Temp Relief Valve Assembly (TP)m
1/2” Male NPT (NPT08)m
High Flow - 3/4” Male NPT (NPT12)m
Field Adjustable Temperature (ADJ)m
Disconnect Switch, Rotary 40A - Lockablem
Nema 4X (2095-1)
â Uses a digital microprocessor for temperature
control
Ultra quick response times for temperature variations - 120
times per second. Microprocessor use is the most energy
efficient means of heating water
â Unlimited hot water
â Saves water and energy - 99% energy efficient
â Space saving compact size:
6-1/4" (H) x 9-5/8" x 2-3/4"
(159 (H) x 244 x 70mm)
â Vandal resistant rugged cast aluminum housing
â Meets applicable building codes including
ADA, UL, IAPMO, UPC, CSA.
â Field Adjustable Temperature 104-125°F
(40-52°C) (Option -ADJ)
â Made in the U.S.A.
â Environmentally friendly
Housing is fabricated from rugged cast aluminum alloy.
Faucet flow controls are supplied with each unit. 3/8”
compression fittings are supplied (standard). Optional 1/2” and
3/4” male NPT water connections available.
Heating coils are nichrome.
Element assembly is fabricated from Celcon plastic.
®
Chronomite Instant-Flow Micro - Standard Flow models are
manufactured to provide reliable point-of-use hot water. There
is no pressure and temperature relief valve needed (unless
required by code), saving time and money on installation.
( Meets ADA )
(Meets health code)
OPTIONS
_____
Made in
the USA
17451 Hurley St. :: City of Industry, CA 91744
Phone [phone] :: 626-937-4270
Fax [phone] :: www.chronomite.com
Complies
with
Standards
for:
1.00 GPM 1.50 GPM 2.00 GPM
M-30/208 30 208 6240 0.65 43 28 21
M-30/240 30 240 7200 0.65 49 33 25
M-30/277 30 277 8310 0.65 57 38 28
M-40/208 40 208 8320 0.65 57 38 28
M-40/240 40 240 9600 0.65 66 44 33
M-40/277 40 277 11080 0.65 76 50 38
°F TEMPERATURE RISE @
MODEL AMPS VOLTS WATTS
ACTIVATION
GPM
Complies
with
Standards
for:
Federal
Public Law
111-380
(No Lead)
LISTED TO:
UL STD 499
CERTIFIED TO:
CAN/CSA STD C22.2 NO. 88
®
Instant-Flow Micro - Standard Flow
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov