User manual

Chill Innovation Wireless 2.4G RF Micro Keyboard English User Manual
Version 1.2 9 / 11
6.5. Multi-Touch Touchpad (only newer Nordic versions)
Scroll the mouse vertically by tapping and sliding your finger up and down in the right
side of the touchpad. Tap the touchpad with two fingers simultaneously to make middle
mouse button click.
Adjust touchpad sensitivity and double-click speed etc. in your hosts Mouse / Touchpad
settings.
6.6. LED Flashlight
This Keyboard comes with a built-in LED Flashlight for great comfort when watching
movies in the dark, locating nearby stuff or checking out notes during presentations etc.
6.7. Backlight
The Keyboard has a built-in backlight feature for easy typing in low light environments.
To toggle the backlight on and off, just press and keys.
6.8. Power saving
When the keyboard is not operated for 1 minute, it will go into sleep mode to save power.
After 30 minutes of inactivity it will go into Standby mode to save even more power.
Just press any key to wake up the keyboard (except the touchpad).
For maximum power save, please turn OFF the keyboard when not in use.
6.9. Pairing
The Keyboard and Dongle included comes pre-paired from the factory for easy setup.
The technology used will ensure that even multiple keyboards can be used
simultaneously without interference. However, if interference should occur in special
circumstances, you can change the radio channel as follow:

Press the PAIR/CONNECT key for about 2 seconds.

The communication indicator will start to blink repeatedly.

If the Dongle and Keyboard match successfully, the yellow LED will turn off and
you can now use the keyboard and touchpad.
7. Tips and troubleshooting
If a problem should occur, you can probably solve it by following one of these directions:

Restart your computer or console.

Plug the USB RF receiver into a different USB port.

Restart your keyboard

Recharge the keyboard