A. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Contents Getting Started Features Preparing Keyboard, mouse and receiver Hardware Installation -Connect the receiver USB Interface Inserting batteries Inserting batteries into mouse Inserting batteries into keyboard -Setting frequency channel or ID Setting frequency channel on keyboard and mouse +.
in Thank you for choosing this Wireless keyboard and Mouse Kits. It operates with digital radii technology to ensure no hinder communication between the keyboard, the mouse and your computer without connecting cable. The transmission and receiving of keyboard and mouse are free from angle restriction. There are two frequency channels each for keyboard and mouse to prevent malfunctions when you operate several radio transmission devices simultaneously. Features .
. Inserting batteries in keyboard The keyboard requires two alkaline batteries {AA}. {1) Remove the battery compartment cover (1) on the bottom of the keyboard by pushing it in the direction of arrow. (2) Insert two AA batteries The illustration in the battery compartment (2) shows how to insert the batteries properly. {3} Recover the battery compartment by pushing the locking lug (2) under the battery compartment.
You may also use any standard mouse software. However, it is possible that {depending on the software used) not all mouse functions are available. . Installing software for keyboard (1) Start the computer and insert the CD ROM. (2) Start the "Setup "program from the CD ROM and follow the instruction on the screen, Once you have installed the software, the following symbols will display on Windows taskbar, the multimedia keys can be activated. Displaying k The symbols indicate which keyboard mode is active.
2. Power Down Depending on the settings in the BIOS Setup or operating system the computer switches to power off mode. 3. Internet With this key you can start the standard browser for your system. 4. E-mail Use this key to start the standard e-mail program for your system. 5. Favorites Open my favorites folder. 8, Calculator Activate the Windows default calculator. 7. Search Activate the OS default search function. 8. Backward Switch to the previous web page. 9. Forward Switch to the next web page. 10.
This key increases the volume of the connected loudspeakers. b. Additional Hotkeys and Scroll whee} 1. Word Activate the Windows default Word program 2. Excel Copy the content you selected Activate the Windows default Excel program 3. Scroll wheel (Mode 1) Use the scroll wheel to control the document or website Scroll up and down. (Mode 2) Press the Scroll wheel, switch fo “window switch” mode. Scroll up and down the wheel to switch the different windows. (Driver required) ¢.
possible. Do not turn your hands too far to the left or right. + Keep your wrists straight while typing. Do not angle your hands upwards or downwards. + Do not rest your hands on the balls of your thumbs while typing, and do not strike the keys too hard. + Relax your hands by occasionally taking a break from typing. During these breaks you should rest your hands on the balls of your thumbs or place your arms on the armrests of your chair.
Prod i Receiver Interface: USB interface. Frequency band: Two channels for keyboard and two channels for mouse. Keyboard — 27.145 MHz and 27.185 MHz Mouse — 26.995 MHz and 27.
trouble ting and ti The keyboard or mouse does not operate following installation or is not recognized. . Make sure that the batteries have been inserted correctly according to the polarity and the receiver is well connected. . Check that your USB port is configured properly. . Check whether the respective channels and (D are set on the receiver and the keyboard or mouse. . Make the connection between the receiver and the keyboard and mouse.
