User Guide

SKU 92496 PAGE 12

9. To determine the proper Acetylene Regulator (parts 1-19) pressure and

Oxygen Regulator (parts A1-A20E) pressure for neutral ﬂame adjusting,

refer to Figures I, and K.

PRE-HEAT OXYGEN CONTROL VALVE

(C26)

OXYGEN CONTROL VALVE

(B8 with OX Label (B9))

ACETYLENE CONTROL VALVE

(B8 with AC Label (B10))

FIGURE L

HIGH PRESSURE LEVER

(C20)

CUTTING

NOZZLE

(D6)

10. Depending on use, attach either a Cutting Nozzle #1 (D6), or Welding Nozzle #2

(D4) to the Cutting Attachment (parts C1-C27).

(See Figure L.)

11. Open the Oxygen Control Valve (B8 with label (B9)) on the Torch Handle. Open

the Pre-Heat Oxygen Valve (C26) on the Cutting Attachment. Adjust the Oxygen

Regulator (parts A1-A20E) to the desired working pressure. Then, close the Oxygen

Control Valve on the Torch Handle. (See Figures E, and L.)

12. Open the Acetylene Control Valve (B8 with label (B10)) on the Torch Handle. Adjust

the Acetylene Regulator (parts 1-19) to the desired working pressure. Then, close

the Acetylene Control Valve on the Torch Handle.

(See Figures E, and L.)

13. Hold the Torch Handle (parts B1-B10) in one hand and the Flint Lighter (D9) in the

other hand. (See Figure M.)

ACETYLENE

CONTROL

VALVE

(B8 with AC Label (B10))

FLINT LIGHTER (D9)

FIGURE M