Specifications

SKU 66753 For technical questions, please call 1-800-444-3353. Page 14
Cutting Technique
Cut
Supports
Figure 5
1. Support the material being cut so
that the cut will open up as the cut is
made, rather than pinch together.
Always cut at full throttle.2.
Start cutting gently, do not force or 3.
squeeze the blade into the material or
the groove of the cut.
Figure 6
4. Move the blade slowly backwards
and forwards, using a small part of
the cutting edge of the blade to slowly
cut material. Do not cut only in one
direction - See Figure 6.
Keep the blade at a right angle to the 5.
cutting surface.
Never cut above shoulder height.6.
Figure 7
7. To avoid kickback, never cut with
the upper section of the blade - See
Figure 7.
Abrasive Blades are not intended for 8.
use with water.
When cutting concrete always use 9.
the water cooling system. To use the
water cooling system:
Before starting the engine attach a a.
garden hose to the Quick Connect
Hose Fitting (5O).
Turn on the hose.b.
Start the engine.c.