User's Manual

Wireless Optical Mouse
User's Guide
PMU-MRF00010_A1
1) Double click the Mouse Setting icon.
2) Follow the instructions of the selection items to set the button functions.
4. Optional Charging Modes for Wireless Optical Mouse
Notice:
- There are three charge modes for the rechargeable version. Please skip this section if
your mouse is not rechargeable. Some mice may have only one or two charge modes.
- Please use rechargeable batteries for the chargeable mouse.
4-1. Power from PC
Connect the mouse to the USB port of PC with the USB to DC cable.
4-2. Power from Adaptor
Connect the mouse with the AC to DC adaptor.
4-3. Power from Cradle
The cradle must be connected with the required AC to DC adaptor in advance. Place the
mouse on the cradle precisely.
5. Optical Sensor On and Off
Notice:
- This function is to save battery power by avoiding the undesired operation. For example,
the button may be pressed or clicked while you carry the mouse to other work
environment.
- Some wireless optical mice may not include this battery saving function.
1) Press and hold the wheel button and then press the Mouse Link Button. The optical sensor
will be off.
2) Please follow the same instruction to power-on the optical sensor.
6. Charging Notice
1) Recommendation: please do not use the mouse during charge periods.
2) At the first time of usage, please charge the batteries at least 6 to 8 hours.
3) The LED indicator or the scroll wheel on the mouse will light while the mouse is low battery.
Please recharge or change the batteries immediately.
4) Press any button to wake up the mouse while the mouse is in the sleeping mode.