Owner's Manual

1.
Flip the handle
up and then pull
out the dipstick
and wipe it with a
clean rag or paper
towel.
2.
Push it back in all the way, wait three seconds and then pull it back out
again.
3.
Check both sides
of
the dipstick,
and read the
lower level. The
fluid level must
be in the
COLD
area
for
a cold
check or in the
HOT
area or
cross-hatched
area for a hot
check.
4.
If
the fluid level
is
in the
acceptable range,
push
the
dipstick
back in all the
way; then flip the
handle down
to
lock the dipstick
in place.