User's Manual

17
during a call, press
(Right soft key) H-free/H-held, and the single will show on
the screen.
• The loudspeaker is automatically deactivated when you end the call or call attempt or
connect the headset to the phone
• The loudspeaker is default setting for playing MP3, voice recorder, using the
loudspeaker with MP3 player and Voice recorder, see detail on MP3 player and Voice
recorder.
To call emergency
• Your phone supports the international emergency number, for example, 060, 112 or
911. This number can normally be used to make emergency calls in any country, with
or without a SIM card inserted, if a GSM network is within range.
• You can place emergency calls “dial 060, 112 or 911 and press
(Send key)” even
if your phone is locked or your account is restricted.
Tip of call options
A call can be connected to any single caller by pressing
(Left soft key). When user
press
(Options) during active call, user can choose one of those functions from the
list:
♦ Hold single call: Put a call on.
♦ End single call: End a call.
♦ New call: Make a new call during an active call.
♦ Phonebook: Shortcut to phonebook menu.
♦ Message center: Shortcut to Message menu.
♦ Sound recorder: Star recorder conversation.
♦ Mute: Mute the call during the conversation.
♦ DTMF: Set On / Off for DTMF (Dual Tone Multi-Frequency) tone dialing system.
Hold single call
Pressing
(Options) and selecting Hold single call allows you to put an active call
on hold. This feature can be used when an incoming call is received during an active call
or if you want to make another without disconnecting the active call.
Make a new call during a call
You can dial a number during a call without disconnecting the active call.
• Press
(Send key) and selecting Hold single call to put an active call on hold and
press Options select New call make a new call by keying new number.
• Press Options and select Swap, new number will go on hold, and old number will be
active.
• Also, you can select record from phonebook, after select New call, press Back to
option list and choose Contacts.
Multiparty call
• You can connect to several people together or individually at a time.
1. Make a call to the first participant.
2. Call the second participant as explained in Make a new call during a call.
3. Press
(Options) and select Conference. This joins the calls to the conference.
4. Repeat step 2 and 3 to allow new participants to be connected to the Conference.
5. Press Options and select End all to end the call. Or press
(End key).
• Any call (participant) can be disconnected by press Options key and select End
Single call.
Switch two calls
• Press
(Options) key. The first call is put on hold.
• To switch between two calls, press Options and choose Swap.
• To end the active call press
(End key). (Or to end both calls at the same time.