MODEL CW-EK-W Please read this manual carefully before using the Electric Kettle . Save these instructions.
WELCOME! Dear ChefWave Customer, Congratulations on your purchase of the ChefWave Electric Kettle. To ensure your safety and many years of troublefree operation, please read this manual carefully before using this product and keep it in a safe place for future reference. We hope you enjoy your new ChefWave Electric Kettle. Sincerely, The ChefWave Team For technical assistance and warranty service, please email us at cs@mychefwave.com.
Electric Kettle SAFETY TIPS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read all Instructions. Do not touch hot surfaces. Use handles or knobs. To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or base in water or other liquid. Close supervision is necessary when any appliance is used by or near children.
OPERATION INSTRUCTIONS: 1. 2. 3. 4. Open the cover and pour water into the kettle. Do not fill past the “Max” water level line. Put the cover on the kettle and set the kettle on its base. Press the power switch. The LED light will turn on to indicate that the kettle is heating. The LED will turn off when heating is complete. CARE & CLEANING: • • • • • 1. 2. 3. 4. 5. Remember to unplug the kettle before cleaning. Do not use steel wool, chemicals or any abrasive cleaner.
Electric Kettle TROUBLESHOOTING Problem Cause Solution Plug not properly connected to outlet LED Damage to plug or socket Inspect and adjust Kettle bottom and power base not properly connected Boiling water overflow Water filled past Max line Pour out water to below the Max line Sediment in kettle Water is too hard Clean the kettle regularly Kettle not heating 1. Fault inside PCBA 2.