Digital Guide

IMPORTANT – PRIME THE UNIT BEFORE FIRST USE
1. Fill the water reservoir to between the “Min” and “Max” markings on the tank.
2. Remove the milk reservoir. Fill the milk reservoir with water (not milk) to between the “Min” and
“Max” markings on the tank and return it to unit.
3. Place a large heatproof cup or mug on the metal coaster set over the drip tray.
4. Set the froth strength to “Extra”. Use the silver froth dispensing tube lever to position the milk
dispensing tube inside the cup.
5. Place an empty portafilter basket in the portafilter, then lock the portafilter into place on the
brew head according to the directions at right.
6. Plug in the unit and turn it on.
7. Press the DOUBLE CAPPUCCINO button.
8. Let the cup fill with water from the brew head and from the froth dispensing tube. When brew
cycle ends, carefully dispose of the water in the cup and in the milk reservoir. The unit is now
primed and ready for use.