Technical data

Restoring Using the LCD Panel
Restoring Factory Defaults Page 29
7. During the Power-1 boot process, text similar to that shown below appears:
Figure 4-9 Activating the Boot menu in HyperTerminal
8. At this point, you have approximately four seconds to hit any key to activate the Boot menu.
9. The Boot menu opens. Scroll to the relevant Reset to factory defaults image and press Enter.
Restoring Using the LCD Panel
To restore the Power-1 appliance to its default factory configuration using the LCD Panel keys:
1. Reboot or power on the appliance.
2. When the countdown begins, press any of the arrow keys.
The Boot menu appears.
3. Using the arrow buttons, scroll to the relevant default factory image.
4. Press .
5. Confirm the reset by pressing .