User's Manual

Page 10 of 31
Operation
Maverick Force 2 Profile User Manual Rev. 1
Settings
(cont.)
Lock Screen
NO
Lock the buttons and touch
screen. Passcode: 0920
YES
Swap XY
NO Do not swap pan and tilt
YES
Pan controls tilt, tilt controls
pan
WDMX Reset
NO Do not reset WDMX
YES Reset WDMX
Backlight Timer
30S
Display turns off after 30
seconds
1M
Display turns off after 1
minute
5M
Display turns off after 5
minutes
ON Display stays on
Loss of Data
Hold Holds last signal received
Close Blacks out fixture
Fans
Auto
Fan speed according to
product temperature
Full Fan speed set on high
ECO Quiet mode
TV25
Maintains LED output up to
an ambient temperature of 77
°F (25 °C) (TV25) or 95 °F
(35 °C) (TV35).
TV35
When using these fan modes,
please set the PWM Options
to 6000Hz or 15000Hz to
prevent any possible
harmonization noise.
Dimmer Curve
Linear
Set the dimmer curve
Square
I Squa
SCurve
Linear2
PWM Option
600Hz
Sets the Pulse Width
Modulation frequency
1200Hz
4000Hz
6000Hz
15000Hz
LED POWER 064–255
Sets the maximum LED output
Min Zoom Focus
NO
Enables/disables minimum
zoom focus
YES
Preset Select
PRESET A
Recorded preset menu
options
PRESET B
PRESET C
Preset Sync
NO Allows recorded preset menu
options to be transferred to
other Maverick Force 2 Profile
fixtures in the DMX daisy chain
YES
USB Update
NO
Enables/disables updating by
USB
YES
Main Level Programming Levels Description