ASSEMBLY INSTRUCTION OAK FINISH ROUND PEDESTAL DINING TABLE WITH STAINLESS STEEL APRON BANDING Table Top EJ Leg Frame Ej Lower Support Bar E Upper Mount Plate 7z & 1PC 1PC PCS 1PC E Lower Mount Plate & Upper Support Bar [E Brit B Lock Washer 14711727 1/4~ 1PC PCS PCS PCS Il Fiat Washer Allen Key [ Wooden Dowel Wooden Plug 1/47X13mm M4X70X70mm 28X30mm @25X18mm L &z O PCS 1PC PCs PCS This page lists all the contents included in the box.
Fix the Upper Support Bar (F) to the Leg Frame (B) by using Wooden Dowel (K}, Flat Washer (1), Lock Washer (H), Bolt (G) with Allen Key (J). Then attach the Lower Support Bar (C) to Leg Frame (B) as below shown. E Attach the Upper Mount Plate (D) to the assembled leg frame by using Flat Washer (1), Lock Washer (H), Bolt (G) with Allen Key (J). Use Wooden Plug (L) to fill the bolt hole.
Fix the Lower Mount Plate (E) to the assembled leg frame by using Flat Washer (1), Lock Washer (H), Bolt (G) with Allen Key (J). Attach the assembled base to Top Panel (A) by using Flat Washer (I), Lock Washer (H), Bolt (G) with Allen Key (J). Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive dealers. Hardware may loosen over dime. Periodically check that all connections are tight.