Assembly Instructions

- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for
durability. Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being
scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A Top 1 B Leg 4
C Pedestal 1 D Cross piece 1
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Large flat
washer
( Φ8.5xΦ19mm)
4 2
Large lock
washer
( Φ8.5xΦ11mm)
4
3
Hexagon nut
(M8x13mm)
4 4
Wrench
(M13mm)
1
5
Small flat
washer
( Φ6.5xΦ13mm)
4 6
Small lock
washer
( Φ6.5xΦ9mm)
12
7
Bolt
(M6x35mm)
12 8
Medium flat
washer
( Φ6.5xΦ16mm)
8
9
Allen key
(M4)
1
TABLE 42'' ROUND WITH SINGLE PEDESTAL