Owner Manual

of#the#solar#lamp.#Do#not#use#any #typ e#o f#so lve nt #for#cle an in g#a nd #b e#ca re ful#n ot #to#p ut #too #m u ch #
pressure#on#the#module#while#cleaning.!
!
FEATURES!!
! Rechargeable(battery(included(
! Powered(by(high(quality(crystalline(solar(cells(
! Aluminum(construction(makes(it(rust(free(
! 4(Natural(White(LED’s(
! Waterproof(design(provides(longer(life(in(all(weather(conditions(
! Light(automatically(turns(on(at(dusk(
PARTS!LIST!
%
#23106! %
%
Part%#%
Description%
Qty.%
1#
Lamp#Head##
1#
2#
Lamp#Pole#
3#
3#
Lamp#Base#
1#
4#
#Screws#
3#
5#
Anchor#(with#pad,#spring#pad,#
and#nut)#
3#
6#
Lamp#Head#Adapter##
1#
INSTALLATION !AN D!USE!!
Post!Lamp!Mounting:!
1) Carefully(remove(the(solar(light(and(all(the(fitting s(o u t(o f(th e (bo x .(
2) Find(a( suitable(place( to(install(the( lamp.(There( are(several( ways(to( secure(the(
post(lamp.(You(may( wish(to(set(the( anchor(bolts(in(cement,(or( secure(the(lamp(
base(to(a(heavy(object.(Be(sure(the(area(is(flat(so(the(lamp(will(stand(straight.((
3) Mark(the(three(holes(from(the(lamp(base(on(the(ground(or(mount(surface.((
4) Using( an( electric( drill,( drill(holes( in( the( mount( surface(where( the( marks( w ere(
made.((
5) Place( the( anchor( in( the( holes( with( the( threaded( ends( out.( Release ( the( nut,( s prin g ( pad,( and( pad( from ( the(
anchor(and(put(the(lamp(ground(base( on to(the(anchor,(the(anchor(should(be(through(the( ho les.(Reinstall( the(
pad,(spring(pad(and(then(the(nut.(Tighten(with(a (w ren ch .((
6) Make(sure(the(lamp(base(is(stable(before(installing(the(lamp(poles.((
7) Install(the(lamp (p o le (o n to (th e (lamp(base(by(su pp lie d (3 (sc rews(and(L(shap e(wrench.(
8) Install(the(rest(o f(la m p (p o le s(a cc o rd in g(t o(s ize (b y(t w ist in g(c lo ck w ise .(
9) Attach(lamp(head(to(lamp(head(adapter.(((
10) Fix(the(lamp(on(to(the(pole(by(twisting(in(a(clockwise(direction. (
#
Wall!Mounting:!!
1) Use(an(electric(drill(to(make(two(holes(in(the(wall.(
2) Place(provided(anchors(into(holes(with(the(threaded(ends(out.(
3) Place(wall(mount(in(line(with(the(holes(and(sec u re (it(w ith (th e(p a d,(sp r ing (p ad ,(an d (n u t.(Tig h te n (w ith (a(w r en c h. (
4) Make(sure(the(wall(mount(is(stable(before(installing(the(lamp(head.(
5) Screw(lamp(head(onto(wall(mount.((
(
Pillar!Mounting:!
1) Use(an(electric(drill(to(make(two(holes(into(desired(surface.(
2) Place(provided(anchors(into(holes(with(the(threaded(ends(out.(
3) Place(pillar(mount(in(line(with(the(holes(and(secure(it(with(the(pad,(spring(pad,(and(nut.(Tighten(with(a(wrench.(
4) Make(sure(the(pillar(mount(is(stable(before(installing(the(lamp(head.(
5) Insert(the(screw(from(the(und e rn e a th (o f(th e (lamp(head(into(t h e(p illa r(mount(and(fas te n (w ith (su p p lie d (n u t.((
!
3”!Pole!Fitter!Mounting:!
%
#23206%
%
Part%#%
Description%
Qty.%
1#
Lamp#Head#
1#
2#
Mounts#(Wall,#Pillar,#3”#Pole)##
3#
3#
Nut##
1#
4#
#Screws#(with#3”#Pole#Mount)#
3#
5#
Anchor#(with#pad,#spring#pad,#
and#nut)#
2#