Installation & Assembly
Step 1
Open the carton and place all the parts on a clean, non-marring surface.
Turn table top upside down.Attach Leg Panel(B) to the Table Top(A) using Bolt(②) and
Washer(③) with Allen Key(①) as shown in the picture above.
Repeat this process with the other Leg Panel (B)
DO NOT FULLY TIGHTEN THE BOLTS.
Step 2
Attach Leg Support Panel(C) between Leg Panels(B) using Bolt(②) and Washer(③) with
Allen Key(①) as shown in the picture above.
Repeat the same process to affix the another Leg Support Panel(C)
Tighten the Bolts.
Page 3 OF 5