Installation manual

1
1-1
Introduction
This document provides step-by-step instructions on how to install a CT4000 ChargePoint® Charging Station.
Summary of Shipping Boxes
Assembly name... Label on box says.... Overview of box contents...
Shipping
Weight
For Installation
Instructions, see...
Top Cap
IMPORTANT:
Open this box first—it
contains this Installation
Guide
CT40XX-CAP* 5 lbs (2.1 kg) Chapter 4
Body CT40X1-BD or CT40X3-BD Bollard Mount (CT40X1-BD):
Wall Mount (CT40X3-BD):
Bollard:
50 lbs (22.7 kg)
Wall:
15 lbs (6.8 kg)
Chapter 2 - Bollard
Chapter 3 - Wall Mount
Cord Management
Retractor
CT4000-CMK CMK:
40 lbs (18.1 kg)
CMK8:
50 lbs (22.7 kg)
Chapter 2 - Bollard
Chapter 3 - Wall Mount
Head CT40X0-HD* or CT40X0-HD-GW*
For gateway stations the box also
includes a Network Enablement
Kit, CT4000-NEK1 (US) or
CT4000-NEK2 (Canada)
Dual Port:
31 lbs (14 kg)
Single Port:
25 lbs (11.3 kg)
Chapter 4
OPTIONAL:
Power Management Kit
CT4000-PMGMT
Allows both ports on a dual port
station to share a single 40A
circuit (Power Share). Also allows
a CT4000 to be set up to operate
at a lower current (Power Select).
5 oz (.14 kg) Appendix B
*The last two digits of the four-digit model number depends on the station’s features. The third digit (CT40X0) is “1” if the station has a single charging port, or ‘2”
if the station has two charging ports. The last digit (CT401X) is either a 1 (bollard mount) or 3 (wall mount).
NOTE: A more detailed list of the contents in each shipping box is provided in the associated chapter with the step-by-step
installation instructions.