Installation manual

4-2
ChargePoint® Charging Stations
Step 1: Check Boxes for Correct Contents
Top cap
The station’s top cap ships in a box containing:
• Top cap (1)
• Phillips screws (2) - in some cases, the top cap does not require screws and instead has integrated snaps that allow you
to snap it onto the head assembly (see page 4-5)
• CT4000 Installation Guide (this document)
Pay attention to the top cap’s attachment type. Some top caps are attached using screws, whereas others have integrated
snaps. Instructions are provided for each type.
If installing both bollard and wall mount stations, also pay attention to the top cap’s shape. As illustrated below, the back of
the top cap is rounded for bollard stations, and flat for wall mount stations.
Side view
(flat back)
Wall Mount
Side view
(rounded back)
Bollard