User Manual

ManualsBrandsChamberlain ManualsBuilding SuppliesChamberlain Group G953EV-P2 Chamberlain/LiftMaster/Craftsman 953EV-P2 3-Button, Security +2.0 Compatible, Includes Visor Clip Garage Door Opener Remote

3-BUTTON REMOTE CONTROLS

MODELS 953EV, 953EVC, 956EV AND 956EVC

To prevent possible SERIOUS INJURY or

DEATH from a moving gate or garage door:

• ALWAYS keep remote controls out of

reach of children. NEVER permit children

to operate or play with remote controls.

• Activate gate or door ONLY when it can be

seen clearly, is properly adjusted and there

are no obstructions to door travel.

• ALWAYS keep gate or garage door in sight

until completely closed. NEVER permit

anyone to cross path of moving gate or

door.

For use with Chamberlain 315 MHz or 390 MHz garage door openers manufactured after

January 1, 1993. The garage door opener activates when the programmed button on the

remote control is pressed. The remote control can activate up to three garage door openers.

Make sure the garage door opener has a working light bulb because it is a programming

indicator.

LED

Locate the Program button on the

remote control.

Locate the Learn

button on the garage

door opener.

NOTE: Your garage door

opener may look different.

OR OR

Learn

LED

Learn

LED

Learn

LED

Green

Red/Orange

Purple

Yellow

Program Button

Press and release the Learn

button on the garage door

opener.

To exit programming mode,

press any remote control

button except the button

that was just programmed.

Install the visor clip.

Press the remote control button

programmed in step 2 until the

garage door opener lights ﬂash

or two clicks are heard.

To test, press the programmed

button on the remote control...

Within 30 seconds...

The Learn LED will light.

Press and hold the program button

the remote control until the LED on

the front of the remote control

turns on.

Learn

Button

Click

The garage door

opener will activate.

Press and release the remote control button you wish to use the

number of times that corresponds with the garage door opener type:

# of Presses Garage Door Opener Type

Security+ 2.0

(Yellow Learn Button)

315 MHz Security+

(Purple Learn Button)

390 MHz Security+

(Red/Orange Learn Button)

390 MHz Billion Code (Green Learn Button)

MODELS 953EV AND 953EVC MODELS 956EV AND 956EVC

GARAGE ACCESS SYSTEM

REMOTE

GARAGE ACCESS SYSTEM

KEYCHAIN REMOTE

PREPARE

PROGRAM THE REMOTE CONTROL (953EV & 953EVC)

953EV &

953EVC

956EV &

956EVC

Summary of content (2 pages)

PAGE 1
3-BUTTON REMOTE CONTROLS MODELS 953EV, 953EVC, 956EV AND 956EVC For use with Chamberlain 315 MHz or 390 MHz garage door openers manufactured after January 1, 1993. The garage door opener activates when the programmed button on the remote control is pressed. The remote control can activate up to three garage door openers. Make sure the garage door opener has a working light bulb because it is a programming indicator.
PAGE 2
PROGRAM THE REMOTE CONTROL (956EV & 956EVC) 1 Press and hold the program button the remote control until the LED on the front of the remote control turns on. 2 Press and release the remote control button you wish to use the number of times that corresponds with the garage door opener type: # of Presses 1 2 3 4 Garage Door Opener Type Security+ 2.