Installation Instructions

35
Operation
Multi-Function Control Panel (continued)
LOCK
The LOCK feature is designed to preventactivation ofthe garage door opener from remote controls
while still allowing activation from the door control and keyless entry.Thisfeature isuseful for added
peace of mind when the home is empty (i.e. vacation).
l Activate: Press and hold the LOCK button for 2 seconds.The command LED will flash as
long asthe lock feature is activated and your handheld remote control will not operate your
door atthistime.
l Deactivate: Press and hold the LOCK button again for 2 seconds.The command LED will
stop flashing and normal operation will resume.
PROGRAM
Any compatible remote controls or wireless keyless entry can be programmed to the garage door
opener by pressing the Learn button.
Push Bar
LIGHT Button
LOCK Button
Command LED
LEARN Button
Remote Control and Keyless Entry*
Pre-programmed remote control included, no need to program the remote.
To add or reprograma remote control, follow the instructionsbelow. Older Chamberlain remote
controlsare NOT compatible,see page 41 for compatible accessories.
PROGRAM USING THE DOOR CONTROL
1. Pressthe LEARN button on the door control to enter Programming Mode.
2. Pressthe LEARN button again,the LED will flash once.
3. Remote Control: Press the button on the remote control that you wish to operate your garage
door.
Keyless Entry: Enter a 4-digit personal identification number (PIN) of your choice on the
keylessentry keypad.Then press the ENTER button.
The garage door opener lights will flash (or two clickswill be heard) when the code has been
programmed.
The command LED
will flash once.
The command LED will
flash once again.
1
2
OR
PIN
? ? ? ?
3
* Notincluded with all models.