Instructions / Assembly
Table Of Contents
- ENGLISH
- BILT Intelligent Instructions
- Installation Manual
- Contents
- Safety Symbol and Signal Word Review
- Unattended Operation
- Preparation
- Assembly
- Installation
- STEP 1 Determine the Header Bracket Location
- STEP 2 Install the Header Bracket
- STEP 3 Attach the Rail to the Header Bracket
- STEP 4 Position the Garage Door Opener
- STEP 5 Hang the Garage Door Opener
- STEP 6 Install the Light Bulbs
- STEP 7 Attach the Emergency Release Rope and Handle
- STEP 8 Install the Door Bracket
- STEP 9 Connect the Door Arm to the Trolley
- STEP 10 Install the Door Control
- STEP 11 Wire the Door Control to the Garage Door Opener
- STEP 12 Attach the Warning Labels
- STEP 13 Install the Protector System®
- STEP 14 Wire the Safety Reversing Sensors
- STEP 15 Connect Power
- STEP 16 Align the Safety Reversing Sensors
- Adjustments
- Battery Backup
- myQ® App Control
- Operation
- Maintenance
- Troubleshooting
- Warranty
- Automatic Garage Door Opener Safety & Maintenance Guide
- Repair Parts
- SPANISH
37
An LED on the garage
dooropener will indicate
Wi-Fi
®
status. See table
below.
LED
myQ®AppControl
Connect With Your Smart phone
YOUWILLNEED:
l Wi-Fi enabled smartphone, tablet or laptop
l Broadband Internet connection
l Wi-Fi signal in the garage (2.4GHz,802.11b/g/nrequired), see page 5
l Password for your home network (router’s main account, not guest network)
l myQ® serial number located on the garage door opener
DOWNLOAD THE myQ® APP TO SET UP AN ACCOUNT AND CONNECT
Open and close your door, get alerts and set schedules from anywhere. Connected smart garage door
openers also receives of tware updates to ensure the opener has thelatest operational features. The garage
door opener must run through a complete cycle before it will activate Wi-Fi® programming.
1. Download themyQ®App.
2. Set up an account and connect.
If you already have the myQ® App installed:
1. Check that your mobile device has the latest software.
2. Download the latest version of the myQ® App.
For more information on connecting your garage door opener, visit support.chamberlaingroup.com.
NOTES:
myQ
®
App control WILL NOT work if the garage door opener is operating on battery
power. To erase the Wi-Fi settings from the opener, see page 42.
Google Playand the Google Playlogo are trademarks of Google LLC.
App Store and the Apple and App Store logos are trademarks of Apple Inc.
Wi-FiStatus
LED Denition
Blue O - Wi-Fi®is not turned on.
Blinking - Garage door opener is in Wi-Fi®learn mode.
Solid - Mobile device connected to the garage door opener.
Blue and Green Blinking - Attempting to connect to router.
Green Blinking - Attempting to connect to the Internet server.
Solid - Wi-Fi®has been set up and garage door opener is connected to the Internet.