Use and Care Manual

ManualsBrandsCesicia ManualsFans20" Black 3-speed Floor Fan, Standing or Wall-mounted, with 360° Angle Adjustment to Give You a Perfect Cooling Angle

Model : FGD-20

Instruction Manual

Read this Instruction Manual carefully before assembling or operating

the appliance and keep it for future reference.

1. SAFETY WARNING

Read this Instruction Manual carefully before assembling or

operating the appliance and keep it for future reference.

When using electrical appliances, basic precautions should always

be followed to reduce the risk of fire, electric shock and injury to

persons, including the following:

Summary of content (8 pages)

PAGE 1
Model : FGD-20 Instruction Manual Read this Instruction Manual carefully before assembling or operating the appliance and keep it for future reference. 1. SAFETY WARNING Read this Instruction Manual carefully before assembling or operating the appliance and keep it for future reference.
PAGE 2
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. To reduce the risk of electric shock, do not immerse or expose this appliance or flexible cord to rain, moisture or any other liquid. Dangerous high voltages are present inside this enclosure. To avoid electric shock, do not open the cabinet, refer servicing to qualified personnel only. Make sure the fan is not placed near drapes,curtains, or any objects that may be drawn into the fan.
PAGE 3
12. 13. 14. 15. 16. 17. 18. 19. 20. Do not let the power cord hang over the edge of a table or counter or let it touch any hot surfaces. Do not insert fingers or allow foreign objects to enter the grill openings as this may cause injury or damage to the appliance.
PAGE 4
1. Safety Screw 2. Front Grill 3. Rear Grill 4. Handle 5. Switch Box 6. Motor 7. Blade 8. Metal Tube 9. Metal Base Remove all packing material and accessories. Make sure all the accessories are included, if any item is damaged or missing, contact your dealer.
PAGE 5
ASSEMBLY OF METAL BASE Ensure the Fan is unplugged from the power supply and turned off before commencing assembly.
PAGE 6
PAGE 7
1. Secure the motor to the rear mesh housing 2. Fix the screws, shock pad and short arm on both sides of the rear m esh cover. 3. Fix the fan blade on the motor shaft. 4. Fix the front and rear mesh cover with screws. 5. Insert the metal tube into the short arm. 6. Fix the wall bracket to the wall by expansion screw. 7. Hang the fan's metal tube on the bracket and fix it with screws. 2. 3. OPERATION 1. Place your fan on a level and dry surface. 2. Plug the fan in to a suitable mains socket.
PAGE 8
  Clean the fan blade and grills with a soft damp cloth. CAUTION: The Fan Blade may have sharp edges. Handle with extreme care. Store the fan in its original box or cover the fan to protect it from dust in a dry place if it will not be used for a long period of time. 5. SPECIFICATION Power Supply………………………………...