Supplementary Document

Page 3 of 3
6. Install Panels
• Put on white cotton gloves, so that the dirt and oil from your hands, does
not get on the panels. (If gloves become soiled, replace them immediately.
• Start installing panels in the middle of the field.
• Maneuver and tilt the panels above the grid, then carefully rest the panels
on the grid.
7. Install Border Panels
• Cut border panels by measuring each one individually. Use a straight
edge to make cuts. If you are using Trim Edge panels, simply cut them. If
you are using Reveal Edge or Narrow Reveal Edge, then you must cut the
panel to match the factory edge.