User's Manual

SKU 92189 For technical questions, please call 1-800-444-3353 PAGE 7
To Operate The Sandblaster Gun:
1. WARNING! Prior to operating the Sandblaster Gun, make sure you
read and understand ALL safety precautions and warnings as outlined in
this manual and in the manual of the sandblaster being used.
To Install A Ceramic Nozzle:
1. The Sandblaster Gun is equipped with four different size Ceramic Nozzles (37)
and Rubber Adapters (38) for fine, medium, and course grit. (See Figure B.)
2. To install a Ceramic Nozzle (37), unscrew and remove the Nozzle Cap Nut (39).
Place the Gasket (36) against the Adapter (35). Place the Ceramic Nozzle
against the Gasket. Insert the corresponding size Rubber Adapter (38) onto the
Ceramic Nozzle. Then, firmly screw the Nozzle Cap Nut back onto the Adapter.
(See Figure B.)
GASKET
(36)
CERAMIC
NOZZLE
(37)
RUBBER
ADAPTER
(38)
NOZZLE
CAP NUT
(39)
FIGURE B
INTAKE CONNECTOR (34)
GRIT SUPPLY HOSE
(NOT INCLUDED)
FIGURE A