User Manual

ENGLISH | 3 2 | ENGLISH
USING YOU HD DIGITAL MICROSCOPE IMAGER
1. Remove the HD Imager and the collar from the box.
2. Attach the adjustment collar to the HD
Imager using the set screws to secure.
3. Remove the eyepiece from your
microscope and replace it with the
assemble imager and collar.
4. Install the software from the product page at celestron.com, on
to your Windows or Mac PC.
NOTE: Mac operating systems are supported, but can only achieve a maximum
of 2MP resolution when taking still images.
5. Once the software is installed, connect your imager by plugging
the attached USB cable into an open USB port on your computer.
6. Once the driver is recognized by your system, the streaming
image should appear in your software window.
7. Focus the microscope as you
would normally.
INTRODUCTION
Congratulations on your purchase of the Celestron HD Digital
Microscope Imager. Your Imager is a precision optical instrument
made of high quality materials to ensure durability and long life, and
designed to give you a lifetime of use with minimal maintenance. It
is miniature in size – 2.5” (64mm) long x 0.9” (22mm) in diameter
and weighs just 1.5oz (42g) but it is powerful in its application with
a 5MP sensor digital CMOS sensor.
The HD Digital Microscope Imager will work with virtually any
microscope (biological and stereo) as long as the eyepiece barrels
are universal sizes 23mm and 30mm or similar. Basically, you
replace the eyepiece in the microscope with the Imager.
Before attempting to use your Imager, please read through the
instructions to familiarize yourself with the functions and operations
to make usage easier for you.
Compatibility with Windows and Mac operating systems allows
for high resolution images and video to be taken, stored on your
computer, saved and shared.
NOTE: The Mac software only supports a maximum 2MP resolution.