Technical Data Bulletin

ManualsBrandsCedAir-Mat ManualsBuilding materials39 in. X 61.5 ft. Roll Roof Ventilation Mat

Advanced Building Products

CedAir-Mat Roof Ventilation Mats 07 72 73 - 1

Advanced Building Products, Inc. October 2016

PO Box 98

Springvale, Maine 04083

Toll Free 800-252-2306

Fax 207-490-2998

Website www.advancedbuildingproducts.com

Email info@ABP-1.com

Guide Specification

Specifier Notes: This guide specification is written in Construction Specifications Institute (CSI) 3-Part

Format in accordance with The CSI Construction Specifications Practice Guide, MasterFormat,

SectionFormat, and PageFormat.

This Section must be carefully reviewed and edited by the Architect to meet the requirements of the

Project and local building code. Coordinate this Section with Division 01, other specification sections,

and the Drawings. Delete all Specifier Notes after editing this Section.

Section numbers and titles are based on MasterFormat 2014 Update.

SECTION 07 72 73

ROOF VENTILATION MATS

Specifier Notes: This Section covers Advanced Building Products, Inc. “CedAir-Mat™” roof ventilation

mats used to create an airspace to promote air flow in all directions between the roofing material (wood,

metal, tile) and the roof sheathing. Consult Advanced Building Products, Inc. for assistance in editing

this Section as required for the Project.

Use of “CedAir-Mat™” may contribute to LEED credits. Consult Advanced Building Products, Inc. for

more information.

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Roof ventilation mats.

Summary of content (4 pages)

PAGE 1
Advanced Building Products, Inc. PO Box 98 Springvale, Maine 04083 Toll Free 800-252-2306 Fax 207-490-2998 Website www.advancedbuildingproducts.com Email info@ABP-1.com October 2016 Guide Specification Specifier Notes: This guide specification is written in Construction Specifications Institute (CSI) 3-Part Format in accordance with The CSI Construction Specifications Practice Guide, MasterFormat, SectionFormat, and PageFormat.
PAGE 2
1.2 RELATED REQUIREMENTS Specifier Notes: Edit the following list of related sections as required for the Project. Limit the list to sections with specific information that the reader might expect to find in this Section, but is specified elsewhere. A. 1.3 Section 07 72 00 – Roof Accessories. REFERENCE STANDARDS Specifier Notes: List reference standards used elsewhere in this Section, complete with designations and titles. A. 1.4 ASTM International (ASTM) (www.astm.org): 1.
PAGE 3
B. Storage and Handling Requirements: 1. Store and handle materials in accordance with manufacturer’s instructions. 2. Keep materials in manufacturer’s original, unopened containers and packaging until installation. 3. Store materials in clean, dry area indoors. 4. Protect materials during storage, handling, and installation to prevent damage. PART 2 2.1 PRODUCTS MANUFACTURERS A. Acceptable Manufacturer: Advanced Building Products, Inc., PO Box 98, Springvale, Maine 04083. Toll Free 800-252-2306.
PAGE 4
3.2 INSTALLATION A. Install roof ventilation mats in accordance with manufacturer’s instructions at locations indicated on the Drawings. B. Install roof ventilation mats to create airspace to promote air flow in all directions between roofing material and roof sheathing. C. Install roof ventilation mats flush against edge of flashing or drip edge. D. Trim roof ventilation mats at roof penetrations. E. Do not overlap roof ventilation mats. F.