Specifications

32
MODELS WITH TILTING GRILL AND SLIDING SHELVES
Operate as follows:
– Assemble the sliding shelves on the oven walls using the 2 screws (fig. 4.12).
In the models with catalytic panels interpose the catalytic panels “A” with the arrow
up (fig. 4.12).
Models with side lamp: The catalytic panel with the hole for the side oven lamp
must be positioned on the left oven wall. DO NOT INTERPOSE THE CATALYTIC
PANEL WITHOUT THE HOLE ON THE LEFT OVEN WALL.
– Position the shelf and tray on the sliding shelves (fig. 4.13).
To dismantle, operate as follows:
– Unscrewing the fixing screws and slide off the sliding shelves and the catalytic liners
(if supplied) to the oven wall as in fig. 4.12.
The grill is secured to the rear wall of the oven on a hinge system that allows
it to be lowered to allow proper access when cleaning the oven ceiling (fig. 4.14).
Fig. 4.12
Fig. 4.13
Fig. 4.14
A
A
HOLE FOR SIDE LIGHT
(SOME MODELS ONLY)
SIDE LIGHT
(SOME MODELS ONLY)