User's Manual

Getting Started
17
Attaching the Belt Clip
1. Align the belt clip post with the hole in the back of the
radio.
2. Gently push until the clip clicks into place.
Removing the Belt Clip
1. Push down on the release tab at the top of the belt clip to
release the catch.
2. Pull the belt clip away from the back of the radio.
Turning Your Radio On and Off
Turn
P clockwise to turn the radio on and counterclockwise to turn the radio off.
The radio chirps and the display briefly shows all feature icons available on your
radio. The display then scrolls through the available channels and Interference
Eliminator Codes.
Setting the Volume
Rotate
P while holding down Q or J until you reach a comfortable listening
level. Rotate
P clockwise to increase the volume or counterclockwise to
decrease the volume.
1042b60a.book Page 17 Friday, January 17, 2003 2:43 PM