User's Manual

2. Use the touch-tone pad to select Handset # to enter into auto intercom call with
paged handset.
3. When the receiving handset connects, press the delete/int/conf button on the
originating handset to conference with the receiving handset and the external
caller. The screen displays CONFERENCE on the originating and receiving
handsets.
NOTE: A handset can enter conference mode directly by pressing
TALK/SPEAKER on the second handset during a call.
Transferring External Calls to Other Handsets
During an external call, you may transfer the external call to another handset.
1. Press the delete/int/conf button on the originating handset to put an external
call on hold, and enter the paged handset number.
2. A long beep is heard and then the two handsets are immediately connected.
Receiving handset shall immediately come into the auto intercom mode that both
“microphone” and “speaker” of this receiving handset shall be enabled such that
the user of receiving handset can freely talk and listen to the conversation.
3. When the receiving handset connects, press the END button on the originating
handset to transfer the call.
Caller ID (CID)
IMPORTANT: In order to use this unit’s Caller ID features, you must
subscribe to either the standard Name/Number Caller ID Service or Call
Waiting Caller ID Service. To know who is calling while you are on the
phone, you must subscribe to Call Waiting Caller ID Service.
This unit receives and displays information transmitted by your local phone
company. This information can include the phone number, date, and time; or the
name, phone number, date, and time.
Call Waiting Caller ID
Provided you subscribe to Call Waiting Caller ID service from your phone
company; if you receive an incoming call and you are using the GE multi handset
system, a beep indicates the presence of a Call Waiting call on the line. The Call
Waiting Caller ID information will be displayed and stored in the history of all
handsets in the system.
• When you hear the call waiting beep in the handset receiver, press the flash
button to put the current call on hold and answer the incoming call. Press the
flash button to return to the original call.
Receiving CID Records
When you receive a call, the Caller ID information is transmitted between the first
and second ring. The Caller ID information appears on the display while the
phone rings, giving you a chance to monitor the information and decide whether
or not to answer the call.
Storing CID Records (In CID Memory)