MSDxx Manual v30

Cc-Smart Technology Co., Ltd
1. Introuduction, Features and Applications
Introduction
The motion is very important and popular today. They appear in all most areas. Special the
motor, that is a big part of this fill.
There are many Dc Servo Drivers in the market but they are very special (not open), more
expensive, so big...
Our driver is very small, low cost, friendlier and open. The driver has an Auto Turning Tool
which auto-detect motor information.
There are many communication methods Pulse/Dir, Uart Network, Virtual Com Port, Usb.
There is software that can configure, control, simulate, visual.
Features
 7 Segment Indicator (not include MSD_E3).
 10-28/40VDC, 0-10A/20A, 1-300/800W (depend on MSD_XX).
 Position, Velocity, Acceleration Control.
 Auto Turning Tool Support.
 Follow Over Protect, Encoder, Motor Fail Protect.
 Over Current, Over Temperature, Short Circuit Protected.
 Support USB Communicate with DcTurningPro Software.
 Support Virtual Com Port to communicate with users.
 Communication: Pulse/Dir, UART, USB, Analog (Velocity Mode).
 Close Loop Support: Smart PID, PID, PI, State Feedback.
 H-Bridge mode with over current, temperature...protect.
Applications
 Car, Toy…
 Robot…
 CNC…