User's Manual

• The failures of the ECM system are displayed.
• The status of most of the inputs and the outputs
are displayed.
• The settings for the ECM are displayed.
• Display the status of the input and output
parameters in real time.
• Display the clock hour of the internal diagnostic
clock.
• The number of occurrences and the clock hour of
the first occurrence and the last occurrence is
displayed for each logged diagnostic code.
• The definition for each logged diagnostic code and
each event is displayed.
• Load new FLASH software.
• Active diagnostic codes.
• Logged diagnostic codes.
See Troubleshooting, “Diagnostic Code List” for the
list of diagnostic codes that can be activated by the
Machine ECM.
Event Codes
Logged Event Codes
Illustration 8 g02291520
Typical Cat ET screen for logged events
20 UENR7061
Introduction